Version 1.1.1 dated February 25th, 2013
Page 48
Original operating instructions
GB
6
Basic operation of the position display
Description:
Standard display mode:
Refers to the situation when only one display light is illuminated on the left in the display win-
dow,
all display lights on the right side of the display window are switched off and
all axis displays do not flash in their current position resp. the display lights beside the keys
,
,
and
and the display light of the selected
axis is illuminated.
6.1
Activation
Introduction of the function: Switch on the position display by pressing the main switch on
the machine. If the position display is not built-in it is switched on by pressing the ON/OFF
switch. The position display starts the self-testing, during this process the LED shows the
following:
A. The serial number of the position display;
B. Company name;
C. Software version;
after completing the self-test the
position display switches over to the standard dis-
play mode.
When you are working in the standard mode the
position display saves:
A. The position of the position display when it was
last switched off;
B. The selected coordinates and the selected
tool when the position display was last switched off;
C. The mm-/inch system which the position display
used.
6.2
Deleting
Introduction of the function:
When the position display is in the standard display mode the displayed value is deleted on
the coordinate axes.
Proceeding when machining:
Go back to the standard display mode;
Press the key
, select the X axis and then press the key
delete the X axis;
Press the key
select the Y axis and then press the key
delete the Y axis;
Serial number
Software version
Company name
0000
0
0000
0000
