Version 1.1.1 dated February 25th, 2013
Page 31
Original operating instructions
MT50
GB
4.6.3 Vertical milling
ATTENTION!
Wait until the Milling machine has come to a complete halt before changing the speed
using the gear switch.
On the drilling-milling head there are two levers to switch over the gear to the desired spindle
speed. The speeds indicated in the table are resulting from the electrical speed switch-over
("High Speed" resp. "Low Speed").
Fig. 4-5: MT50 view from the right
4.6.4 Speed table vertical milling
Fig. 4-6: Speed table vertical milling
Selector switch
Gear stage
