Adjustments
ZA-V BAG0087.11 01.20
97
8.4.4
Determining the shutter position with the sliding ruler
The sliding ruler is used to determine the shutter position after per-
forming a spread rate check.
This is required for implements with manual shutter adjustment using
the setting lever and for implements with EasySet.
The sliding ruler consists of the covering film and 3 sliding inserts.
•
Insert 1 for determining the desired target quantity in kg/s.
•
Insert 2 for determining the actual spread rate during the spread
rate check in kg/s.
•
Insert 3 for determining the shutter position.
Both sides of the sliding ruler must be used, depending on the spread
rate.
To determine the shutter position for normal and high spread
rates (fertiliser).
To determine the shutter position for low spread rates (slug
pellets or fine seeds). Only for the spread rate check using the left
shutter.
Summary of Contents for ZA-V
Page 135: ...ZA V BAG0087 11 01 20 135 13 Hydraulic diagram ZA V Hydro Fig 80 ...
Page 136: ......