Amazone ZA-V, Operating Manual, Page: 118 / 136

Use of the machine
118 ZA-V BAG0087.11 01.20
10.3 Notes for spreading slug pellets (e.g. Mesurol)
The standard model ZA-V can also be used for wide-area spreading
of slug pellets. The slug pellets (e.g. Mesurol) may either be pellets or
have a pellet-like shape and are spread in relatively small quantities
(e.g. 3 kg/ha).
Pay attention to the following particularities for application of slug
pellets.
•
Select Fine spreading material on the control terminal.
• Spreading of slug pellets must be executed at constant forward
speed because speed-proportional quantity regulation is not ac-
tive.
•
Calibration of slug pellets is executed on the left hopper tip with
the calibration chute.
WARNING
When filling the spreader, avoid breathing in product dust and
direct skin contact (wear protective gloves). After the applica-
tion, thoroughly wash your hands and all affected areas of your
skin with soap and water.
DANGER
Some slug pellets can harm children and pets. Ensure that they
are stored in an area that is inaccessible to both children and
pets. Always refer to the directions for use from the slug pellet
manufacturer.
For additional information on handling slug pellets, refer to the manu-
facturer's instructions and the general safety precautions for handling
crop protection agents (in Germany, data sheet No. 18 of the Federal
Biological Research Centre for Agriculture and Forestry.
• When spreading slug pellets, ensure that the outlet opening are
always covered with product and make sure to always drive at a
constant speed. A residue of approx. 0.7 kg for each hopper tip
remains, which is impossible to spread according to the intended
use of the fertiliser. To empty the spreader, open the slider and
catch the flow of product (using a tarp, for example).
•
Slug pellets must not be mixed with fertiliser or other materials
in an attempt to operate the spreader in a different setting range.