Cleaning, maintenance and repair
Fig. 156
Fig. 157
Fig. 158
Fig. 159
Fig. 160
Fig. 161
•
For winter operation, grease the protective tubes to prevent
them from freezing.
•
Also observe the installation and service instructions from the
PTO shaft manufacturer, which are fastened to the PTO shaft.
Steering cylinder heads on steering axles
In addition to the lubrication work, you must also make sure that the
steering cylinder and the supply line are always bled.
Brake shaft bearing, outer and inner
Caution: no grease or oil should be allowed to get into the brakes.
Depending on the model series, the cam bearing for the brakes may
not be sealed.
Only use lithium saponified grease with a dropping point greater than
190 °C.
UX Super
BAG0054.10 11.16
195