Coupling and uncoupling the machine
8.2
Uncoupling the machine
WARNING
Risk of crushing, cutting, being caught or drawn in, or impact
through inadequate stability and tipping over of the uncoupled
machine.
Park the empty machine on a horizontal space with a hard surface.
When uncoupling the machine, there must always be enough space
in front of the machine so that you can align the tractor with the ma-
chine if necessary.
1. Park the empty machine on a horizontal space with a hard sur-
face.
2. Uncouple the machine from the tractor.
2.1 Secure the machine against unintentionally rolling. See
page 143.
2.1 Lower the stand to the parking position.
2.2
Un
couple the connection fitting.
2.3 Draw the tractor forwards by approximately 25 cm.
→
The space created between the tractor and the machine al-
lows better access for decoupling the PTO shaft and the
power supply lines.
2.4 Secure the tractor and machine against unintentional start-
ing and unintentional rolling.
2.5 Decouple the PTO shaft.
2.6 Place the PTO shaft in the holder.
2.7 Uncouple the supply lines.
2.8 Fasten the supply lines in the corresponding parking sock-
ets.
2.9 Hydraulic brake: detach parking brake pulling cable from
tractor.
UX Super
BAG0054.10 11.16
151