Cleaning, maintenance and repair
12.1
Cleaning
•
Monitor brake, air and hydraulic hose lines particularly carefully
•
Never treat brake, air or hydraulic hose lines with benzin, ben-
zene, petroleum or mineral oils.
•
Lubricate the trailed sprayer after cleaning, particularly after
cleaning with a pressure washer / steam jet, or fat-soluble medi-
ums.
•
Observe the statutory requirements for the handling and removal
of cleaning agents.
Cleaning with a pressure washer / steam jet
•
Always observe the following points when using a pressure
washer / steam jet for cleaning:
ο
Do not clean any electrical components.
ο
Do not clean any chromed components.
ο
Never aim the cleaning jet of the cleaning nozzle of the
high pressure cleaner/steam jet directly at lubrication
points, bearings, rating plates, warning signs, and stickers.
ο
Always maintain a minimum jet distance of 300 mm be-
tween the pressure washer or steam jet cleaning nozzle
and the machine.
ο
The set pressure of the high-pressure cleaner / steam jet
must not exceed 120 bar.
ο
Comply with safety regulations when working with pressure
washers.
UX Super
BAG0054.10 11.16
189