Amazone Pantera 4503, Operating Manual

Page: 108 / 120

Fault
108 ISOBUS field sprayer BAG0171.9 11.20
F15171 Warning The update could not be completely exe-
cuted. The supply voltage is too low or the
connection has been interrupted
•
Let the motor run to stabilize the supply
voltage, switch off consumers
•
Re-establish the cable connection
F15172 Warning At least one LED of the affected control
unit could not be switched on or off
•
Check the nozzles of the affected con-
trol unit
•
Check the wiring harness
•
Contact your AMAZONE service partner
F15173 Warning The displayed control unit has identified
an internal error (counting from the out-
side left ascending).
•
Contact your AMAZONE service partner
F15174 Warning The displayed control unit is not respond-
ing (counting from the outside left ascend-
ing).
•
Check the connection cable to the con-
trol unit
•
Contact your AMAZONE service partner
F15175 Warning The voltage of the capacitor bank in the
displayed control unit is too low (counting
from the outside left ascending).
•
Check the nozzle bodies connected to
the control unit for sluggishness.
•
Check the voltage supply of the imple-
ment
F15176 Warning A nozzle body of the displayed control unit
cannot be moved (counting from the out-
side left ascending).
•
Contact your AMAZONE service partner
F15177 Warning A control unit has been installed that has
a different hardware revision than the rest
of the system.
•
All control units must have the same
hardware revision.
F15178 Warning More control units were detected on the
right than on the left.
•
Check the cable and plug connection of
the control units in the left boom (begin-
ning on the outside)
•
Check the control units in the boom on
the left (beginning on the outside)
F15179 Warning More control units were detected on the
left than on the right.
•
Check the cable and plug connection of
the control units in the right boom (be-
ginning on the outside)
•
Check the control units in the boom on
the right (beginning on the outside)
F15180 Warning The displayed control unit has an outdat-
ed software version and cannot be auto-
matically updated (counting from the
outside left ascending).
•
Contact your AMAZONE service partner
•
Update the affected control unit manual-
ly
F15181 Warning The displayed control unit expects a con-
trol unit; however, it has not been detect-
ed (counting from the outside left ascend-
ing).
•
Contact your AMAZONE service partner
•
Check the affected control unit
F15182 Note The pre-selected tank fill level has been
reached
F15183 Note Speed is greater than 0.62 mph (1 km/h)
when calibrating AutoTrail
•
Bring the vehicle to a standstill
•
Check the speed source
F15184 Note Changes have been made to the nozzle
body
•
Check the allocation of the standard
nozzle body and assign the extra noz-
zles and boundary nozzles