Cleaning, maintenance and repairs
Centaur BAG 0070.1 12.08
83
11 Cleaning,
maintenance and repairs
WARNING
Risk of contusions, cutting, catching, drawing in and knocks
through
unintentional falling of the machine raised using the
tractor's three-point hydraulic system.
unintentional falling of raised, unsecured machine parts.
unintentional start-up and rolling of the tractor-machine
combination.
Secure the tractor and machine against unintentional starting and
unintentional rolling away before you perform any cleaning, servicing
or maintenance work on the machine. See page 64.
WARNING
Risk of contusions, cutting, catching, drawing in and knocks
through unprotected danger points!
Mount protective equipment, which you removed when cleaning,
maintaining and repairing the machine.
Replace defective protective equipment with new equipment.
11.1 Cleaning
Pay particular attention to the brake, air and hydraulic hose
lines.
Never treat brake, air and hydraulic hose lines with petrol,
benzene, petroleum or mineral oils.
After cleaning, grease the machine, in particular after cleaning
with a high pressure cleaner/steam jet or liposoluble agents.
Observe the statutory requirement for the handling and removal
of cleaning agents.
Cleaning with a high pressure cleaner/steam jet
Always observe the following points when using a high pressure
cleaner/steam jet for cleaning:
Do not clean any electrical components.
Do not clean any chromed components.
Never aim the cleaning jet from the nozzle of the high
pressure cleaner/steam jet directly on lubrication and
bearing points.
Always maintain a minimum jet distance of 300 mm
between the high pressure cleaning or steam jet cleaning
nozzle and the machine.
Comply with safety regulations when working with high
pressure cleaners.