Commissioning
Centaur BAG 0070.1 12.08
63
6.1.2
Requirements for tractor operation with attached machines
WARNING
Risk of breakage during operation of components through
unapproved combinations of connecting equipment!
Ensure:
that the connection fittings on the tractor possess sufficient
permissible support capability for the supported weight
actually present.
that the axle loads and weights of the tractor altered by the
drawbar load are within the approved limits. If necessary,
weigh them.
that the tractor's actual static rear axle weight does not
exceed the permissible rear axle weight.
that the permissible total weight of the tractor is observed.
that the approved load capacities of the tractor tyres are not
exceeded.
6.1.3
Machines without their own brake system
WARNING
Risk of contusions, cuts, dragging, catching or knocks from
insufficient tractor brake power.
The tractor must achieve the brake delay specified by the tractor
manufacturer, even with the machine connected.
If the machine does not possess its own brake system:
Then the actual tractor weight must be greater than or equal to
(
) the actual weight of the connected machines.
The maximum movement speed is 25 km/h.
