Adjustments
72
Centaur BAG 0070.1 12.08
Carrying out the adjustment
To reduce the working depth:
1. Tractor control unit 1 (2 x yellow).
Raise the machine, thus relieving spacer
elements.
2. Increase the number of spacer elements on
the piston rod.
To increase the working depth:
1. Tractor control unit 1 (2 x yellow).
Raise the machine, thus relieving spacer
elements.
2. Decrease the number of spacer elements
on the piston rod.
Fig. 41
Carry out the adjustment on:
Left and right rear roller
The roller feelers/support wheels.
Before making the adjustment, pull the
fastening bolt (Fig. 42/2).
After the adjustment, hold the spacer
elements (Fig. 42/1) in place using the
fastening bolt and secure them using
the clip pin (Fig. 42/3).
Fig. 42
The weight of rollers and support
wheels can be used to enable better
collection behaviour on dry ground.
To do so, pivot the free spacer
elements (Fig. 43/1) on the piston rod
in front of the adjustment plate (Fig.
43/4) after setting the working depth.
First:
Actuate tractor control unit
1
(1 x yellow).
Lower the machine.
Fig. 43
Only make the adjustment with the machine folded out.
