Structure and function
Centaur BAG 0070.1 12.08
57
5.17 Harrow
(Optional)
The
Centaur
can be equipped on the rear
with harrows (Fig. 34) as additional tillage units.
The harrow produces a fine seed bed.
Setting the harrow
1. Actuate the tractor control unit
1
.
The harrow lifts up, releasing the adjusting
pins.
Move the adjusting pins towards the rear
for higher aggressiveness.
Move the adjusting pins towards the
front for lower aggressiveness.
2. Release the clip pin (Fig. 34/1).
3. Secure the adjusting pins (Fig. 34/2) in the
desired position.
4. Resecure the clip pin.
Fig. 34
Fix all harrow adjusting pins in the same position.
If there is a lot of plant remains on the soil surface, there is the risk of
increasing shaking of the harrow. In this case, the aggressiveness
must be reduced, i.e. the tines must be set at a flatter angle.
For use in seed bed preparation on ploughed or cultivated areas, the
aggressiveness can be increased for more intensive work, i.e. the
tines can be set at a steeper angle.
When not in use, remove the harrow.
