Use of the machine
Centaur BAG 0070.1 12.08
81
10.1
Placing the machine in the working position
Switching the machine from the transport position to the
working position:
1. Remove protective tarpaulins.
2. Open the stop tap to prevent unintentional folding out, see page
33.
Fig. 51
The brake must be released when
tractor control unit 1
is actuated
so that the roller wheels can unroll.
3. Actuate
tractor control unit 1
.
Completely raise the machine (Fig. 51/1).
4. Raise the tractor lower links (Fig. 51/2).
5. Actuate
tractor control unit 2
:
Completely unfold the machine (Fig. 51/3).
6. Actuate
tractor control unit 1
.
Completely lower the machine (Fig. 51/4).
7. Lower the tractor's lower links (Fig. 51/5)
until the frame is horizontal.
Feeler wheels: the optional feeler wheels may not bear the
weight of the machine.
Support wheels (optional): the machine is parked on the support
wheels.
8. Fasten the protective tarpaulins to the foldable booms.
