Adjustments
74
Centaur BAG 0070.1 12.08
Scale for working depth
The scale (Fig. 46/1) helps you to set the spindles to the same length.
Fig. 46
Adjusting the spindle using the ratchet
1. Remove the clip pin (Fig. 47/3).
2. Engage the turning lever (Fig. 47/2) in the
required direction.
3. Use the hand lever (Fig. 47/1) to lengthen
or shorten the spindle.
4. Secure using the clip pin (Fig. 47/3).
5. Secure the hand lever using the tensioning
band.
Fig. 47
For
the
Centaur,
the working depth of the levelling unit
automatically adjusts when the working depth of the coulter is
adjusted.
For
the
Centaur Super
in particular, the working depth of
the levelling unit significantly influences the traction force
demand, which, in turn, influences the fuel consumption in
relation to the area. For this reason, you should not set the
working depth to a greater value than required.
