Amazone Avant 6002-2, Original Operating Manual

Page: 4 / 124

6.2.7 Installing the lighting on the seeding
unit
50
6.3 Preparing the implement for
operation
51
6.3.1 Adjusting the working position sensor 51
6.3.2 Folding the lighting 52
6.3.3 Unfolding the implement 52
6.3.4 Adjusting the placement depth on
the TwinTeC coulter
52
6.3.5 Adjusting the placement depth on
the RoTeC coulter
53
6.3.6 Adjusting the coulter pressure
hydraulically
54
6.3.7 Adjusting the coulter pressure
mechanically
55
6.3.8 Adjusting the additional coulter
pressure on the TwinTeC coulter
56
6.3.9 Lifting the coulters hydraulically 56
6.3.10 Lifting the coulters mechanically 57
6.3.11 Adjusting the coulter harrow 57
6.3.12 Adjusting the exact following harrow 60
6.3.13 Adjusting the tramline marker on
the implement frame
66
6.3.14 Removing the road safety bars 70
6.3.15 Starting work with one part-width
section
71
6.3.16 Adjusting the row spacing 71
6.4 Preparing the machine for road
travel
72
6.4.1 Putting on the road safety bars 72
6.4.2 Unfolding the lighting 73
6.4.3 Folding the tramline marker onto
the implement frame
73
6.4.4 Folding the implement 73
6.4.5 Road travel with an Avant seeding
combination
74
6.5 Calculating the permissible
payload
74
7 Using the machine 76
7.1 Using the implement 76
7.2 Checking the placement depth 77
7.3 Turning on the headlands 77
8 Parking the machine 78
8.1 Parking the TwinTeC coulter 78
8.2 Disconnecting the supply lines
from the hose package
78
8.3 Disconnecting the hydraulic
hose lines
79
8.4 Uncoupling the ISOBUS line 79
8.5 Uncoupling the power supply 80
8.6 Uncoupling the Avant seeding
combination
80
8.7 Parking the Avant seeding unit
separately
81
8.8 Installing the lighting on the soil
tillage implement
86
9 Repairing the machine 88
9.1 Maintaining the machine 88
9.1.1 Maintenance schedule 88
9.1.2 Checking the TwinTeC concave disc 89
9.1.3 Checking the TwinTeC concave disc
spacing
89
9.1.4 Checking the TwinTeC depth control
wheel
91
9.1.5 Checking the TwinTeC depth control
wheel scraper
91
9.1.6 Checking the depth control discs
and depth control wheels
92
9.1.7 Checking the cutting discs 94
9.1.8 Checking the RoTeC furrow former 94
9.1.9 Cleaning the segment distributor
head
95
9.1.10 Checking the top link pin and lower
link pin
95
9.1.11 Checking the hydraulic hose lines 96
9.1.12 Cleaning the conveyor section 97
9.2 Lubricating the implement 98
9.2.1 Overview of lubrication points 99
9.3 Eliminating faults 100
TABLE OF CONTENTS
MG6545-EN-II | B.1 | 22.07.2021 II