5.
Take off the universal operating tool and allow the
catch
2
to engage in a groove of the grid.
6.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
6.3.8 Adjusting the additional coulter pressure on the TwinTeC coulter
NOTE
The adjustment of the additional coulter pressure
must be adapted to the respective operating
conditions. The optimum adjustment can only be
determined during field operation.
1.
Remove the linch pin
1
.
2.
Remove the washer
2
.
3.
Move the spring holder
3
to the desired
position.
4.
Install the washer.
5.
Install the linch pin.
6.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
1
2
3
+
-
CMS-I-00003181
6.3.9 Lifting the coulters hydraulically
1.
To activate the coulter lift on implements with
Comfort hydraulic system,
see ISOBUS software operating manual "Pre-
selection for hydraulic functions".
2.
To lift the coulters, reduce the coulter pressure
beyond the value of 0.
actuate the "green 2" tractor control unit.
CMS-T-00004371-B.1
CMS-T-00004416-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6545-EN-II | B.1 | 22.07.2021
56
