9.1.7 Checking the cutting discs
INTERVAL
Every 50 operating hours
or
weekly
1.
Determine the diameter of the cutting discs.
2.
If the diameter of a cutting disc is smaller than
289 mm,
replace the cutting disc.
3.
To replace the cutting disc,
remove the bolts
1
on the front side of the
cutting disc.
4.
Replace the worn cutting disc
2
.
5.
Install the bolts.
1
2
CMS-I-00004584
9.1.8 Checking the RoTeC furrow former
INTERVAL
Every 50 operating hours
or
weekly
1.
Remove the depth control disc or depth control
wheel.
2.
When the indicated measurement
A
on a
furrow former is smaller than 98 mm,
replace the furrow former.
3.
To replace the furrow former,
remove the bolt
2
and dispose of it.
4.
Replace the worn furrow former
1
.
5.
Install the a new bolt
2
. The bolts for the furrow
former are coated and may not be reused.
2
1
A
CMS-I-00004667
CMS-T-00006335-A.1
CMS-T-00006374-A.1
9 | Repairing the machine
Maintaining the machine
MG6545-EN-II | B.1 | 22.07.2021
94
