1.
Remove the nut
1
.
2.
Remove the bolt
3
.
3.
Move the harrow bracket
2
to the desired
position.
4.
Install the bolt
3
.
5.
Install the nut
1
and tighten it.
6.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
1
2
3
+
-
CMS-I-00003182
6.3.12 Adjusting the exact following harrow
6.3.12.1 Moving the exact following harrow into working position
The roller and the coulters force the soil outwards to
different extents depending on the forward speed and
the soil properties. The outer harrow elements must
be adjusted such that the soil is guided back and a
trackless seedbed is created. The greater the forward
speed, the further the outer harrow elements have to
be set outwards.
1.
Loosen the bolt
2
with the universal operating
tool.
2.
Push the sliding element
1
outwards.
3.
Tighten the bolt
2
with the universal operating
tool.
4.
Make the same setting for the other side of the
implement.
5.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
1
2
CMS-I-00004674
CMS-T-00006326-A.1
CMS-T-00006334-A.1
6 | Preparing the machine
Preparing the implement for operation
MG6545-EN-II | B.1 | 22.07.2021
60
