7.2 Checking the placement depth
1.
Remove the fine soil
1
over the seed
2
.
2.
Determine the placement depth
3
.
3.
Cover the seed with fine soil again.
4.
Check the placement depth in several places.
1
3
2
CMS-I-00003257
7.3 Turning on the headlands
NOTE
Lifting the implement causes the metering roller in
the metering unit to stop. When the fan is running,
seed emerges from the coulters until the conveyor
section is empty.
1.
To prevent seed accumulations,
give the tractor control unit for the fan drive
priority.
2.
To prevent lateral loads when driving in curves
on the headlands,
Raise the implement.
3.
To avoid damage to the implement,
pay attention to obstacles when turning.
4.
When the direction of the implement matches
that of the direction of travel,
lower the implement.
CMS-T-00004517-B.1
CMS-T-00004491-B.1
7 | Using the machine
Checking the placement depth
MG6545-EN-II | B.1 | 22.07.2021
77
