5.
To install the lighting holder
2
on the seeding
unit,
connect the stirrup bolt
5
to the retaining tube
3
.
6.
Install the nuts
4
with washers.
7.
Establish the electrical connection
2
.
8.
Install the second lighting holder
6
.
1
2
5
4
6
3
CMS-I-00003223
9.
Align the lighting holders
1
and
2
.
10. Tighten the nuts.
R
L
55 mm
55 mm
1
2
CMS-I-00003221
6.3 Preparing the implement for operation
6.3.1 Adjusting the working position sensor
The working position sensor monitors the implement
position in the three-point hydraulic system and
switches the metering drives. The length of the
actuation lever is adjustable. For safe actuation, the
control lever must rest on a level contact surface.
1.
loosen the nut
1
.
2.
To rest the control lever
2
on a level contact
surface,
set the position of the control lever in the desired
position on the top link
3
.
1
2
3
CMS-I-00002608
CMS-T-00004357-B.1
CMS-T-00003625-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6545-EN-II | B.1 | 22.07.2021
51
