Amazone Avant 6002-2, Original Operating Manual

Page: 94 / 124

Repairing the machine
9
9.1 Maintaining the machine
9.1.1 Maintenance schedule
After initial operation
Checking the hydraulic hose lines see page 96
at the end of the season
Checking the depth control discs and depth control
wheels
see page 92
daily
Checking the top link pin and lower link pin see page 95
Every 10 operating hours / daily
Cleaning the segment distributor head see page 95
Every 50 operating hours / weekly
Checking the TwinTeC concave disc see page 89
Checking the TwinTeC concave disc spacing see page 89
Checking the TwinTeC depth control wheel see page 91
Checking the TwinTeC depth control wheel scraper see page 91
Checking the cutting discs see page 94
Checking the RoTeC furrow former see page 94
Checking the hydraulic hose lines see page 96
Every 100 operating hours / at the end of the season
Cleaning the conveyor section see page 97
CMS-T-00004443-B.1
CMS-T-00004446-B.1
9 | Repairing the machine
MG6545-EN-II | B.1 | 22.07.2021 88