Amano BX-1600 Operational Manual Download Page 7

Page: 7 / 42

1-3

Caution

•

Do not install the time recorder in unstable or inclined place.

The time recorder could drop or fall, causing an injury.

•

Do not put a water container or metal object on the time

recorder.

If water or metal object gets inside the time recorder, it may cause ﬁre or electric

shock.

•

Do not install this time recorder in any place where there is

oily smoke or moisture near the cooking table or humidiﬁer.

Also do not install it in a dusty place.

Either of the above could cause ﬁre or electric shock.

•

For mounting the time recorder on the wall, use a ﬁxture

suitable to wall material so that the weight of the unit can be

securely held.

If not, the time recorder may fall, causing an injury.

•

Be sure to hold the plug when the power plug is being

disconnected from the power outlet.

If you pull the power cord, it may be damaged, causing ﬁre or electric shock.

•

Before replacing the ribbon cassette, remove the lid and

disconnect the power plug from the power outlet.

Replacing the ribbon cassette while the power plug is connected may cause injury

or electric shock.

The Operator should be grounded ﬁrst before starting maintenance.

If maintenance is started before he is properly grounded, the equipment may be

damaged by static electricity.

Electromagnetic Compatibility and the Low Voltage Directive

This apparatus has been verified for compliance with EU (European Union)

directives 89/336/EEC for electromagnetic compatibility (EMC) for operation at

220-240V AC, 50/60Hz and with the low voltage directive 73/23/EEC. It bears the

CE mark.

When an apparatus is used in a system, EU directives may require that the system

is veriﬁed for EMC compliance.

Relation to the Health and the Environment

The plastic currently used for the outer enclosure of this apparatus does not contain

the halogen substance.

Summary of Contents for BX-1600










































Search results

Summary of Contents for BX-1600

Reviews:

Related manuals for BX-1600

Brands by name

Popular brands

Amano BX-1600, Operational Manual

Search results

Summary of Contents for BX-1600

Reviews:

Related manuals for BX-1600

Brands by name

Popular brands