Amano BX-1600 Operational Manual Download Page 29

Page: 29 / 42

1-25

Setting Day of the Week and Time

In a weekly program, day of the week and time are set ﬁrst, and other items such as

irregular mark printing and shift of print position are set later.

Example : Monday to Friday and 8:30.

Turn the dial of the setting index. Then indicate

the Program No.

Press the DY/HR/MN button to begin setting.

Set day of the week.

To set Monday to Friday, press the

/DAY ON

button.

To set Saturday and Sunday, Press the

–

/DAY

OFF button. Then, press the “E” button to register

the setting.

Set Hour.

Press the

/DAY ON button or

–

/DAY OFF button

to set the hour. Press the “E” button to register

the setting.

Set Minute.

Press the

/DAY ON button or

–

/DAY OFF button

to set the minute. Press the “E” button to register

the setting.

Refer to page 1-26 for operation procedures from here.

More than 1 item can be set, and their order does not matter.

Other items can be set.

If incorrect setting is made, return to the display in

step “5” and press DY/HR/MN button to perform

setting again. Or press “C” button for two seconds

until beep sound is heard and repeat from step “2”.

WEEKLY PROGRAM

PRINTING

POSITION

DY/HR/MN

MARK

＋

DAY ON

−

DAY OFF

MO TU WE TH FR SA SU

Summary of Contents for BX-1600










































Search results

Summary of Contents for BX-1600

Reviews:

Related manuals for BX-1600

Brands by name

Popular brands

Amano BX-1600, Operational Manual

Search results

Summary of Contents for BX-1600

Reviews:

Related manuals for BX-1600

Brands by name

Popular brands