ENGLISH
1-2
FOR THE OPERATIONAL SAFETY
Carefully read to fully appreciate the following warnings and cautions before
starting use of the equipment.
Warning
•
Do not use with any power voltage other than that indicated on
the product.
This could cause fire or electric shock.
•
Do not overload power outlet.
This could cause fire or electric shock.
•
Do not connect or disconnect power plug with wet hand.
This could cause electric shock.
•
Do not damage or break power cord.
If a heavy object is put on it, or the cord is pulled or bent forcibly, the cord may be
damaged and this could cause fire or electric shock.
•
Do not remove any parts other than the lid.
There is high voltage part inside, and touching it could cause an electric shock.
•
Do not remodel the time recorder.
This may cause fire or electric shock.
•
If any abnormality occurs such as smoke, smell or heat,
disconnect the power plug from the power outlet and contact
your dealer.
Continued use of the time recorder in the above cases could cause fire or electric
shock.
•
If foreign matter (metal piece, water or other liquid) get inside
the time recorder, immediately disconnect the power plug from
the power outlet and contact your dealer.
Continued use of the time recorder in this case cause fire or electric shock.
•
To avoid fire hazard, use only a fuse of the correct type,
voltage rating, current rating as specified by the manufacturer:
Power source Fuse
110-120VAC
250V, 700mA
220-240VAC
250V, T500mA (Time Lag) with a low breaking capacity.
Use of any other materials for fuse will cause fire.
Make sure that the fuse has the proper specified capacity prior to use.
•
When replacing the fuses, do not use fuses that exceed the
specified capacity or use wire and silver paper.
Use of any other materials for fuse will cause fire.
Make sure that the fuse has the proper specified capacity prior to use.
