Amano BX-1600 Operational Manual Download Page 38

Page: 38 / 42

ENGLISH

1-34

IF PRINTS BECOME DIM

(Replacing the Ribbon Cassette)

Warning

Caution

•

Do not connect or disconnect

power plug with wet hand.

This could cause electric shock.

•

Do not damage or break

power cord.

If a heavy object is put on it, or

the cord is pulled or bent forcibly,

the cord may be damaged and this

could cause ﬁre or electric shock.

•

Do not remove any parts

other than parts the removal

procedure of which are

described in this item.

There is high voltage part inside, and

touching it could cause an electric shock.

•

Before replacing the ribbon

cassette, remove the lid

and disconnect the power

plug from the power outlet.

Replacing the ribbon cassette while

the power plug is connected may

cause injury or electric shock.

•

Be sure to hold the plug

when the power plug is

being disconnected from

the power outlet.

If you pull the power cord, it may be

damaged, causing ﬁre or electric shock.

Open the lid.

Remove the cassette.

Insert a new cassette.

Close the lid.

Ribbon

holders

Handle

Ribbon guide

Dot printer head
Knob

Insert the key into the keyhole,

turn it clockwise and open the

lid upward.

With the dot printer moved

to the center, disconnect the

power plug from the power

outlet.
While pulling the ribbon holders

toward the front, pull out the

handle of the cassette to

remove it.

Correctly insert a new cassette

between the ribbon guide and

the dot printer head.

Push the cassette head until

it clicks into place. Turn the

knob clockwise to remove any

slackness in the ribbon.
Connect the hooks in the lid (A

in the ﬁgure) with the hooks in

the case (B). Bring the lid down

toward you until it is inserted

into place.

Summary of Contents for BX-1600










































Search results

Summary of Contents for BX-1600

Reviews:

Related manuals for BX-1600

Brands by name

Popular brands

Amano BX-1600, Operational Manual

Search results

Summary of Contents for BX-1600

Reviews:

Related manuals for BX-1600

Brands by name

Popular brands