Amano BX-1600 Operational Manual Download Page 5

Page: 5 / 42

1-1

INTRODUCTION

Read this manual carefully for sale and proper use of the product. Also, after

reading this manual, preserve it at a handy location for quick reference at needs.



The specifications, appearance, and descriptions are subject to change due to

improvement.



This manual has been carefully prepared, but if you find any errors or any

descriptions which you cannot understand clearly, contact the dealer from whom

you have bought your time recorder.

BX1600 components are as follows. Be sure to check before operation that all

components are supplied.



BX1600

time recorder



An operation manual

(this manual)



One pair of keys

(two keys)



A bracket for wall

installation



A spare fuse

110-120VAC ··250V, 700mA

220-240VAC ··250V, T500mA

(Attached to the front case)



Seals for different

languages

Components

Note

BX1600 time recorders will not operate normally unless installed in a proper

environment. Do not install them outdoors or where they are exposed to rain.

Summary of Contents for BX-1600










































Search results

Summary of Contents for BX-1600

Reviews:

Related manuals for BX-1600

Brands by name

Popular brands

Amano BX-1600, Operational Manual

Search results

Summary of Contents for BX-1600

Reviews:

Related manuals for BX-1600

Brands by name

Popular brands