Amano BX-1600 Operational Manual Download

Page: 36 / 42

ENGLISH

1-32

TROUBLESHOOTING

Troubleshooting

Trouble

Causes and Corrective Measures

The time recorder does

not accept time card.

Power failure.



Wait until power supply is restored.

The power cord is disconnected.



Insert the power plug ﬁrmly into the

power outlet.

Cards were inserted or pulled out

by force.



Pull the power plug out of the power

outlet, then insert it again.

A long “beep!” sound is

heard without printing.

The card was inserted in the card

pocket backwards.



Insert it in the pocket the other way

round.

The card was not correctly

inserted in the card pocket.



Insert it in the pocket with slight

pressure.

The date is set

incorrectly.

Mistake in setting date.



Reset the date referring to “Setting

the Date” (See page 1-20).

Light printing

(Imperfect printing)

The ribbon is worn out.



Replace the ribbon cassette.

The ribbon cassette is not set

correctly.



Set it correctly.

The print position is

wrong.

Incorrect setting of pay period

ending date, etc.



Set them correctly referring to

“Changing Pay Period Ending Date”

(See page 1-16) for an example.

Improper use of the time

recorder.



Explain how to insert cards in the

card pocket and how to remove

them.

Unclear printing

Improper use of the time

recorder.



Explain how to remove a card from

the card pocket.

After all the above items have been checked, if the time recorder does not operate

correctly, contact your dealer. Do not disassemble or lubricate, etc.

Summary of Contents for BX-1600










































Search results

Summary of Contents for BX-1600

Reviews:

Related manuals for BX-1600

Brands by name

Popular brands

Amano BX-1600, Operational Manual

Search results

Summary of Contents for BX-1600

Reviews:

Related manuals for BX-1600

Brands by name

Popular brands