manualshive.com logo in svg

Amano BX-1600, Operational Manual, Page: 12 / 42

Share
Download
Amano BX-1600 Operational Manual Download Page 12

ENGLISH

1-8

Installation

CAUTIONS WHEN INSTALLING

Proper installation and good power conditions will enable you to operate the time 

recorder for a long time. 

Caution

• 

Do not install the time recorder in unstable or inclined place.

The time recorder could drop or fall, causing an injury.

• 

Do not put a water container or metal object on the time 

recorder.

If water or metal object gets inside the time recorder, it may cause fire or electric 

shock. 

• 

Do not install this time recorder in any place where there is  

oily smoke or moisture near the cooking table or humidifier. 

Also do not install it in a dusty place.

Either of the above could cause fire or electric shock.

Installation location

• 

Prepare a stand about 75cm high.

• 

Install the time recorder horizontally.

Improper installation locations

•    

Places exposed to direct 

sunlight or close to heat 

sources

•    

Dusty or unstable places

•    

Places exposed to rain

•    

Places exposed to strong 

vibrations or shocks

Summary of Contents for BX-1600











































Reviews:

No comments