Amada ML-2550A, Operation Manual

Page: 26 / 229

26
ML-2550A/2551A
4. Product Composition
Main unit
Provided with the number of branch shutters with open-close sensor based on the
number of deliveries.
Model Sharing method Specification
ML-255□A-010 Single delivery Output to a single fiber
ML-255□A-020 2-powersharing Simultaneous output to 2 fibers
ML-255□A-030 3-powersharing Simultaneous output to 3 fibers
ML-255□A-040 4-powersharing Simultaneous output to 4 fibers
ML-255□A-002 2-timesharing Output to one optionally selected from 2 fibers
ML-255□A-003 3-timesharing Output to one optionally selected from 3 fibers
ML-255□A-004 4-timesharing Output to one optionally selected from 4 fibers
ML-255□A-022
2 timesharings of
2-powersharing
deliveries
Output to 2 optical fibers of an optionally selected block
after 4 fibers are divided into 2 blocks, namely, front
2-fiber block and rear 2-fiber block
Optical fiber
Any optical fiber of the followings is connected to the main unit depending on
the specification that you selected at the time of purchase. The model No. differs
according to the length.
Model Type Core diameter Length
SIH-03CA□□m
SI
φ 0.3mm
3m, 5m, 10m, 15m, or 20m
SIH-04CA□□m φ 0.4mm
SIH-06CA□□m φ 0.6mm
SIH-08CA□□m φ 0.8mm
ST-1000-MT □□m φ 1.0mm
⇒
There are limitations to the maximum laser energy and power that can be input
into the optical fiber. For details, refer to the Appendixes, "Specifications" on page
206.
Output unit
The output unit with the specification that you selected at the time of purchase is
connected to the main unit. For details, refer to the Operation Manual or Specification
for the output unit.