Amada ML-2550A, Operation Manual

Page: 208 / 229

208
ML-2550A/2551A
Available Output
Available Output
The available upper-limit output depends on the setting of peak power and
pulse width (laser output time ms). It is graphically shown for each model.
To obtain the maximum rated output with a short pulse width setting, it is necessary
to increase the peak power or repetition. Set conditions such as the pulse width and
repetition not to exceed the upper-limit output.
The specification for each model is as follows.
Model ML-2550A ML-2551A
Maximum rated output 400 W 300 W
Maximum output energy 80 J/P (Pulse width 10 ms) 50 J/P (Pulse width 10 ms)
Maximum peak power 8 kW 5 kW
Pulse width Standard: 0.3 to 100.0 ms (0.1 ms steps)
Fine setting: 0.25 to 5.00 ms (0.05 ms steps)
⇒ The graphical numeric value is for reference. The value changes according to
each flashlamp, equipment, or set waveform.
⇒ To use the flashlamp for a longer time, we recommend the setting of 80% or less
of the value shown in the graph below. The setting can be 100% of the value, but
the lamp life and the replacement interval of the O-ring for YAG rod may become
shorter.
ML-2550A
0
50
100
150
200
250
300
350
400
450
0 1 2 3 4 5 6 7 8
1ms
2ms
3ms
Peak power (kW)
Upper-limit
output (W)