Amada ML-2550A, Operation Manual

Page: 102 / 229

102
ML-2550A/2551A
1. Setting Welding Schedules
(3) Press the MEMORY SWITCH button.
The MEMORY SWITCH screen appears.
2
Switching the Pulse Width Setting Range
(1) Move the cursor to "7" of "SWITCH 1" and press the ON key.
<Note>
When the pulse width setting range is switched, the set values of SCHEDULE are
initialized. To prevent misoperation, the setting cannot be changed unless No.8 of
SWITCH 1 is set to ON. When the setting of No.7 of SWITCH 1 is changed and the
ENTER key is pressed, the setting of No.8 of SWITCH 1 is returned to OFF. It takes
about 15 seconds until initialization is completed. The POWER lamp blinks during
that time. Turn off the power supply after blinking stops.
(2) Press the "BACK" button.
The INITIALIZE screen reappears and the setting range for pulse width on the
SCHEDULE screen is switched.
Setting example before switching ("7" of SWITCH 1: OFF)