Operating Instructions PA-xxP
961-00035 rev11
18/42
The pulse 2 profile screen follows the format of the pulse 1 screen. From this screen, it is
possible to edit the profile data, trigger a test weld, setup limits (both voltage and energy)
or enter the graph menu to view further information about this output.
The setup procedure is the same as that for the first pulse.
Delay time.
This is the delay between two weld pulses. The time is set in milli-seconds,
from 1 to 999ms.
Enable/Disable Energy limits Pulse 2. Turns
GREEN to indicate limits enabled/on.
Weld button. Press to fire
weld on this output.
Returns to the
pulse 1 screen.
Display Weld Monitor
Enable/Disable Voltage limits Pulse 2. Turns
GREEN to indicate limits enabled/on.
Displays Current
Profile number
and name.
Delay time
between pulse 1
and 2 in milli -
seconds.
Minimum and
Maximum voltage
measured during peak
period.