Operating Instructions PA-xxP
961-00035 rev11
12/42
3.4
Getting Started
3.4.1
Power on
Ensure the unit is connected to a suitable mains lead and all the cables are properly
connected to the welding torch. Switch on. The Indicator LED below the left corner of
the screen will illuminate red, then flash orange (while system booting up), then go steady
green. The colour touch screen will display an initialisation screen.
3.4.2
The Default Menu Screen
The
DEFAULT MENU SCREEN
is the screen shown after power up.
SETUP (Man Mode)
allows the user to setup and store weld profiles offline manually.
LOG IN/OUT
provides password protection entry to allow access to varying levels of machine adjustment.
GAS
allows the user to select how the gas valve is controlled.
RUN (Auto Mode)
allows monitoring of the system when operated by a PLC on a production line.
I/O MONITOR
provides a graphical view of the machine inputs and outputs with provision to test them.
PROFILE EDITOR
allows weld profiles to be adjusted dynamically while the machine is operating under
external high speed control.
IO MONITOR
PROFILE EDITOR
CONFIG MENU
PASSWORD PROTECTED
SETUP (MAN MODE)
LOG IN/OUT
GAS VALVE CONTROL
RUN (AUTO MODE)