AM General M915A1, Technical Manual

Page: 713 / 757

TM 9-2320-283-20-3
Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Continued).
STOCK SIZE
1/2" OUTER DIAMETER
MATERIAL BLOCK
DESCRIPTION
STEERING PUMP HOSE
SPECIFICATION
STEERING PUMP HOSE PART NUMBER
CUT
ITEM TUBE OR HOSE LENGTH
MANUFACTURED
FROM
(INCHES) NSN
1 5995198 54.00 208-8
2 5995197 39.00 208-8
END FITTINGS PART NUMBER
END FITTING END FITTING
PART NUMBER PART NUMBER
NONE NONE
NONE NONE
Figure E-5. 1/2" STEERING PUMP HOSE.
MATERIAL BLOCK
STOCK SIZE DESCRIPTION
SPECIFICATION
5/8" OUTER DIAMETER HEATER HOSE
HEATER HOSE PART NUMBER END FITTINGS PART NUMBER
ITEM TUBE OR HOSE
C U T MANUFACTURED
LENGTH
NO. PART NUMBER (INCHES)
FROM
END FITTING END FITTING
NSN
PART NUMBER PART NUMBER
1 5571141 11.00 M/145-20038 NONE
NONE
2 MA145-20001 3.00 M/145-20038 NONE NONE
3 5571150 51.00 M/145-20038 NONE NONE
4 5571150 33.00 M/145-20038 NONE
NONE
INSTRUCTIONS:
Figure E-6. 5/8" HEATER HOSE
Determine hose part number needed from RPSTL and cut squarely to correct length
as shown above.
E-6