AM General M915A1, Technical Manual

Page: 565 / 757

TM 9-2320-283-20-3
ACCESSORY ITEMS.
3-298. HEATER ASSEMBLY REPLACEMENT AND REPAIR (Continued).
LOCATION/ITEM ACTION REMARKS
A. REMOVAL.
1. Two clamps (21). Loosen from two items (20).
2. Two hoses (20).
Disconnect from item (14).
Keep two items (20)
raised to prevent
coolant from running
out.
3. Four nuts (22) Remove from four items (24).
and washers (23).
4. Three wires (2). Remove electrical tape and
Tag items (2).
disconnect three items (2).
5. Two clamps (3). Loosen from two items (1).
6. Two hoses (1). Remove from item (6).
7. Two clips (9).
Remove from item (6) and
two items (8).
8. Two wires (8). Remove from two items (7).
9. Mat (5). a. Pull out from under item
(4).
b. Pull back, away from item
(6).
10. Heater assembly Remove from cab. Pull item (6) from
(6).
bottom and turn clock-
wise.
NOTE
Only remove insulators if they are
damaged.
11. Two insulators Remove from four items (24).
(25).
3-1738