AM General M915A1, Technical Manual

Page: 301 / 757

TM 9-2320-283-20-3
SPRING, SHOCK ABSORBERS, AND TORQUE RODS.
3-249. FRONT SPRING PIN SCREWS AND FITTINGS REPLACEMENT (Continued).
LOCATION/ITEM ACTION REMARKS
NOTE
•There are six spring pins and fit-
tings.
All spring pins are replaced
in same way, except as noted. Right
front shown here.
•Front spring pins require use of suit-
able portable hydraulic press and 500
psi pressure for removal and installa-
tion.
•If removing right front spring pin,
begin with step 1, otherwise start
with step 2.
A. REMOVAL.
1. Cooling system.
2. Fitting (1).
3. Pin (3).
4. Nut (6).
5. Screw (2).
a. Drained. Refer to paragraph 3-52.
b. Remove radiator outlet Refer to paragraph 3-58.
tube.
Remove from item (2).
Remove from item (2). Discard item (3).
Remove from item (2). Discard item (6).
Remove from items (4) and
Discard item (2).
(5).
6. All metal parts.
Clean and inspect.
Refer to paragraphs 3-4
and 3-5.
3-1474