AM General M915A1, Technical Manual

Page: 151 / 757

TM 9-2320-283-20-3
STEERING SYSTEM.
3-220. POWER STEERING LINES AND FITTINGS REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
B. GEAR TO COOLER HOSE AND TUBE REPLACEMENT (Continued).
12. Gear to cooler
Unscrew and remove from item
Have a suitable contain-
tube assembly
(8).
(10).
er ready to catch any
fluid from item (10).
13. Connector (8).
Remove from item (9).
14. All parts.
Clean and inspect.
Plug opening at once.
Refer to paragraphs 3-4
and 3-5.
15. Connector (8). a. Wrap threads with thread Refer to paragraph 3-7.
sealing tape.
b. Install in item (9).
16. Gear to cooler
tube assembly
(10).
Screw onto item (8).
17. Hose (3) and two a. Push one end of item (3)
clamps (1).
through hole in item (2).
b. Install two items (1) on
item (3).
c. Push ends of item (3) onto
items (10) and (15).
d. Push two items (1) to ends
of item (3) and tighten
screws.
18. Grille, two new Install.
straps (11), clamp
Refer to steps 7 thru 9.
(13), and screws
(12).
3-1324