AM General M915A1, Technical Manual

Page: 313 / 757

TM 9-2320-283-20-3
SPRING, SHOCK ABSORBERS, AND TORQUE RODS.
3-251. TORQUE RODS REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
CAUTION
There are two shim packs. Each pack
contains four shims. Each shim is a
different thickness. Do not mix up
shims in one pack with shims
in other
pack.
1. Two screws (8),
Loosen far enough to remove
washers (7), and
two items (5).
nuts (2).
2. Two shim packs
(5).
Remove two items (5) from
between two items (4) and
(6).
3. Two screws (8),
Remove from item (6).
washers (7), nuts
w , and brackets
(4).
NOTE
.If removing forward torque rod, do
step 4 and skip step 5.
.If removing rear torque rod, skip step
4 and do step 5.
.If removing both torque rods, do both
steps 4 and 5.
4. Two screws (l0), a. Remove from item (11) and
washers (7), and
(9).
nuts (2).
b. Remove item (11) from item
(9).
5. Two screws (l0), a. Remove from item (3) from
item (1).
b. Remove item (3) from item
(1)
3-1486