AM General M915A1, Technical Manual

Page: 627 / 757

TM 9-2320-283-20-3
GAGES (NONELECTRICAL).
3-310. SPEEDOMETER SHAFT REPLACEMENT (Continued).
LOCATION/ITEM ACTION REMARKS
A. REMOVAL.
1. Speedometer shaft
a. Remove from the back of Remove item (2) by
(2).
of item (1). reaching from under
dash. Item (2) is on
the left-hand side of
item (1) and has a
hexagon nut.
2. Cable tie (3).
b. Push through firewall.
Remove by cutting from item Discard item (3).
(4).
3. Speedometer shaft
a. Remove from item (5).
(2).
b. Remove from under vehicle.
4. All metal parts. Clean and inspect. Refer to paragraphs 3-4
and 3-5.
C. INSTALLATION.
5. Speedometer shaft a. Push small nut end of item
(2).
(2) through hole in fire-
wall and into cab.
b. Install onto back of item
(1).
c. Install other end onto item
(5).
6. New cable tie (3). Insert one end of item (3)
through item (4) and around
item (2). Secure item (3).
NOTE
Follow-on maintenance action required:
None.
3-1800