Altigen AltiWare ACC 5.1 Administration Manual Download Page 54 | Manualshive

Page: 54 / 383

Altigen AltiWare ACC 5.1 Administration Manual Download Page 54

40

AltiWare ACC 5.1 Administration Manual

4. In the License Key field of the Add License pop-up window, enter the license key

and click OK.

Continue adding licenses with the Add License button until all licenses are entered.

5. Click Save Register Form to save registration information as a Register.htm file

and copy to a network drive or removable storage device.

6. From any PC with an Internet connection, open the Register.htm file.
7. On the AltiGen Software License Registration web page, click the Proceed to Online

Registration.

8. The next web page displays your currently registered version. Select Re-register or

Upgrade/migrate to drop-down list to select the version you wish to upgrade to
or migrate to, then click Next.

9. The next web page allows for inputting System and Dealer Installation ID. In the

System Key field, enter your system key (located on the End User License
Agreement). In the Dealer Installation ID field, enter the ID number assigned to
your Dealer. This information can be obtained by contacting either your local
authorized AltiGen Dealer or AltiGen Technical Support.

«
...
52
53
54
55
56
...
»

Summary of Contents for AltiWare ACC 5.1
































































































































































































































































































































































































Reviews:

No comments