Altigen AltiWare ACC 5.1 Administration Manual Download Page 40 | Manualshive

Page: 40 / 383

Altigen AltiWare ACC 5.1 Administration Manual Download Page 40

26

AltiWare ACC 5.1 Administration Manual

Based on your current AltiWare version and installed licensing, one of the following is
required:
1. New 5.1 systems with new bundle license with prefix 9xA1

1.

The system should be imaged with 5.1 Update 1 or later release.

2.

After installing boards to the system, invoke online (click the Online Register
button) or offline product registration (click the Save Register Form button to
export a register.htm file, and then double-click this file to connect to the
AltiGen offline registration web site) and enter the software licenses you are
registering.

Note:

Note: Direct access to the offline registration web site via the URL is no longer
supported.

«
...
38
39
40
41
42
...
»

Summary of Contents for AltiWare ACC 5.1
































































































































































































































































































































































































Reviews:

No comments