Altigen AltiWare ACC 5.1 Administration Manual Download Page 46 | Manualshive

Page: 46 / 383

Altigen AltiWare ACC 5.1 Administration Manual Download Page 46

32

AltiWare ACC 5.1 Administration Manual

5. 5.0A ACC to 5.1 ACM special upgrade

1.

Follow scenario 4 through to step 5. If you select from any of the features that
have been removed from 5.1 ACC on the product registration page, you are
prompted by a special upgrade web page. (See the following figure.)

2.

Submit a special upgrade request form with credit card information.

3.

Upon approval from AltiGen Sales, the following is done:

•

$325 processing fee is charged to the credit card

•

The following licenses are generated and linked with the system key (cannot
be registered with other system key):

–

5.0A ACM Upgrade License

–

Matching ACM Agent seat license

•

An e-mail with the newly generated licenses and software upgrade
instructions are sent to the Dealer

4.

Purchase a Media Kit to perform software upgrades.

5.

Register the product:

•

Register the product to migrate from 5.0A ACC to 5.0A ACM.

«
...
44
45
46
47
48
...
»

Summary of Contents for AltiWare ACC 5.1
































































































































































































































































































































































































Reviews:

No comments