Altigen AltiWare ACC 5.1 Administration Manual Download Page 42 | Manualshive

Page: 42 / 383

Altigen AltiWare ACC 5.1 Administration Manual Download Page 42

28

AltiWare ACC 5.1 Administration Manual

5.

Follow the directions onscreen to purchase Software Assurance.

6.

If you are not ready to purchase, your pending order can be saved for 30 days,
reopened, and completed.

7.

Product registration is performed and an e-mail with license activation file
attachment is sent to the purchaser.

2. New 5.1 systems with old bundle license with prefix 9xA0

1.

5.1 Update 1 must be loaded to the system in order to purchase Software
Assurance.

2.

Perform the existing 5.1 product registration. Make sure the old bundle license
is added to the licenses you are registering.

3.

At the end of product registration, a Software Assurance purchase link is
available. Click the link to go to the Assurance & Warranty web site. (Software
Assurance purchase is optional.)

«
...
40
41
42
43
44
...
»

Summary of Contents for AltiWare ACC 5.1
































































































































































































































































































































































































Reviews:

No comments