manualshive.com logo in svg

Altigen AltiWare ACC 5.1, Administration Manual, Page: 45 / 383

Share
Download
Altigen AltiWare ACC 5.1 Administration Manual Download Page 45

Chapter 2:  Software Installation & License Registration

AltiWare ACC 5.1 Administration Manual 31

6.

6.If any unsupported features are used, the target release is set to ACM 5.1, 
and a special upgrade request needs to be submitted for approval (see scenario 
5).

7.

7.If no special upgrade is needed, the process is the same as scenario 3, 
"Existing 5.1 systems", except that a 5.1 upgrade license is generated 
automatically in the product registration file.

8.

8.Purchase a Media Kit to perform software upgrades.

9.

9.After purchasing Software Assurance and receiving the license activation file, 
you can upgrade the server software to 5.1 Update1 using the full installation 
package. Please note that no new license can be registered to the 5.0A license 
activation file after the Software Assurance purchase.

Summary of Contents for AltiWare ACC 5.1
































































































































































































































































































































































































Reviews:

No comments