Alps Electric MD-1300 User Manual Download Page 90

Page: 90 / 186

Chapter 2 - Various Printing Operations

Click Preview in the Print dialog box.

The dialog box for selecting cartridges is displayed.

This dialog box indicates which cartridges are currently loaded
in the printer. If the loaded cartridges are not correct, change
them at this time.

Note

The metallic color that is assigned may differ from the intended
metallic color, so be sure to check the Preview image before
printing.

When the loaded cartridges are correct, click OK.

The Preview window is displayed.

Confirm that the specified metallic colors are correct.

If the Preview image does not look correct, click Cancel and
respecify the colors in your application program.

Note

The Preview window shows the metallic colors that will actually
be printed rather than those specified by the application.

Summary of Contents for MD-1300



























































































































































































Search results

Summary of Contents for MD-1300

Reviews:

Brands by name

Popular brands

Alps Electric MD-1300, User Manual

Search results

Summary of Contents for MD-1300

Reviews:

Brands by name

Popular brands