Alps Electric MD-1300, User Manual

Page: 28 / 186

26
Chapter 1 – Major Functions and Operations
3. Lift the paper stopper.
Gently press the upper part of the paper stopper to raise its
lower part. If the stopper is forced upward, it may slip out.
Note
To load Photographic-Quality Paper (4" x 6" / 100 x 148 mm) or
Photographic-Quality Labels, do not lift the paper stopper.
4. Load paper.
Extend the paper feed guide until it is slightly wider than the
paper to be used. Riffle the sheets of paper, and then insert
them into the sheet feeder so that the right edge of the paper
is flush with the right edge of the guide. Set the sheets with the
printing surface facing upward.
Note
Riffle the sheets before loading them into the sheet feeder. If the
sheets adhere to one another during loading, multiple sheets
may be fed in together.
Make sure that the paper has no more than 0.2" / 5 mm of bend.
If the paper used is significantly bent, print quality may be de-
graded.
Note
For continuous printing on Photographic-Quality Paper (4" x 6"
/ 100 x 148 mm) or Photographic-Quality Labels, load the guide
sheet supplied with the paper into the sheet feeder. Then place
the sheets or labels on the guide sheet.
Paper stopper
guide sheet