Alps Electric MD-1300, User Manual

Page: 113 / 186

111
2. Roll up both sheets together with an approximate diam-
eter of 1 inch to resist the curl.
3. Leave them rolled up for five minutes.
4. Unroll them, and the curl should be corrected.
Note
Do not leave the back print film attached to the transfer sheet
too long after the transfer. Doing so will make the sheet get
curled up more tightly.
Now you have an image with glossy finish.
Step 7
¨ ¨
¨ ¨
¨
Obtain a Matte Finish
If you want to create a matte finish, perform the following steps
after completing the steps for making a glossy finish.
1. Place the matte finishing sheet on the image side of the
paper with the silicon coated side face down (so that the
cut corner is in the lower left corner).
Paper with the back
print image
Paper with the back
print image
Matte Finishing Sheet
Matte Finishing Sheet
Plain paper
(paper for copiers)
Approximate diameter of 1 in / 25 mm
Curled sheet with a transferred
image facing up
Approximate diameter of 1 in / 25 mm
Printing on Back Print Film