Alps Electric MD-1300, User Manual

Page: 55 / 186

53
Printing on Photographic-Quality Paper (4" x 6" / 100 x 148 mm)
This section describes how to print Photographic-Quality Color images on Photographic-
Quality Paper. With Photographic-Quality Color printing, you can print continuous-tone
images with the same high quality as photographs. In Photographic-Quality Color print-
ing, you can also print with an overcoat ink that produces a smooth, shiny surface like a
photograph.
Requirements
You need the following items for Photographic-Quality Color printing.
•
Ink cartridges
Make sure that you use only the Photographic-Quality ink cartridges listed
below.
Photo cyan ink cartridge (Part No. 105812-00)
Photo magenta ink cartridge (Part No. 105814-00)
Photo yellow ink cartridge (Part No. 105816-00)
Photo overcoat ink cartridge (Part No. 105818-00)
•
Media
Photographic-Quality Paper (4" x 6" / 100 x 148 mm) (Part No. 105824-00)
•
The guide sheet (the thick paper with the written description) included with
the set of paper sheets
Important
Make sure that none of your Photographic-Quality Paper is
warped more than 0.2" / 5 mm. Warped sheets can cause unsat-
isfactory print results.
Each sheet should have a warp of 0.2" / 5 mm or less when placed
on a flat surface.
Important
•
Always use Photographic-Quality Paper for Photographic-
Quality Color printing. Failure to do so can damage the printer
as well as the cartridge ribbon. Up to 20 sheets of paper can
be loaded into the sheet feeder at once.
•
Print surfaces that have been overcoated cannot be used for
subsequent printing. If you attempt to do so, the printer may
malfunction.
0.2" / 5mm or less
0.2" / 5mm or less
Printing on Photographic-Quality Paper (4" x 6" / 100 x 148 mm)