27
EN
Tested Area
Standard
Used for
tests
Temperature
Force Transmitted
Level
Level 1 requirements:
average value
≤
18kN; No
impact above 24kN
Level 2 requirements:
average value
≤
9kN; No
impacts above 12kN
Central Back
1621-
2:2014
20°
Average 10.05kN
Peak 18.98kN
Level 1
Canadian compliance Statement:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to RSS-210 of the IC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
EU compliance Statement:
Tech-Air
®
5 System contains a Bluetooth Low Energy Radio Module, with the following
characteristics:
Frequency Band
2402÷2480 Mhz
Rated Output Power
0.002344 Watts
Alpinestars SpA hereby declares that this wireless device is in compliance with the Directive
2014/53/EU. A copy of the EU Declaration of Conformity is available at eudeclaration.
alpinestars.com
Changes or modifications not expressly approved by Alpinestars
could void the user’s authority to operate the equipment. (Part.
15.21).
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment. (RSS-210)
WARNING!
WARNING!
FCC ID:
RFR-S50
IC:
4957A-S50
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
