40
-EN
1
Amplifier Link Connector
Outputs Amplifier Link control signals.
Connect this to an external Amplifier Link
compatible amplifier, using the (also separately sold)
Amplifier Link box KCE-511M.
2
Antenna Receptacle
3
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
This lead should be used only for controlling the vehicle's power
antenna. Do not use this lead to turn on an amplifier, or a signal
processor, etc.
4
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
5
Audio Interrupt In Lead (Pink/Black)
6
Illumination Lead (Orange)
This lead may be connected to the vehicle's instrument
cluster illumination lead. This will allow the backlighting of
the unit to dim whenever the vehicle's lights are turned on.
7
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle's fuse
box or another unused power source which provides (+)12V
only when the ignition is turned on or in the accessory
position.
8
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle's
battery.
9
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
!
Right Front (+) Speaker Output Lead (Gray)
"
Right Front (–) Speaker Output Lead (Gray/Black)
#
Right Rear (–) Speaker Output Lead (Violet/Black)
$
Right Rear (+) Speaker Output Lead (Violet)
%
Left Rear (+) Speaker Output Lead (Green)
&
Left Rear (–) Speaker Output Lead (Green/Black)
(
Left Front (–) Speaker Output Lead (White/Black)
)
Left Front (+) Speaker Output Lead (White)
~
Power Supply Connector
+
Ai-NET Connector
Connect this to the output or input connector of another
device (CD Changer, Equalizer, INTERFACE ADAPTER
FOR iPod™* etc.) equipped with Ai-NET.
* When connecting iPod, INTERFACE ADAPTER FOR iPod™
(KCA-420i) is required. For details on how to connect, refer to
the Owner's Manual of KCA-420i.
You can input TV/video sound by connecting an optional
Ai-NET/RCA Interface cable (KCA-121B) to this component.
,
Steering Remote Control Interface Connector
To steering remote control interface box.
-
Fuse Holder (10A)
.
Rear Output RCA Connectors
RED is right and WHITE is left.
/
Front Output RCA Connectors
RED is right and WHITE is left.
:
Subwoofer RCA Connectors
RED is right and WHITE is left.
;
Setting the 3WAY/2 WAY switch
Set the 3way/2way switch according to your audio system.
<
System Switch
When connecting a processor or divider using Ai-NET, place
this switch in the EQ/DIV position. When no device is
connected, leave the switch in the NORM position.
Be sure to turn the power off to the unit before changing the
switch position.
=
Ai-NET Cable (Included with CD Changer)
>
RCA Extension Cable (sold separately)
